Custom Options

Minor* changes to a standard GHTG are free, please contact us and let us know what you need. Most panels are created when they are ordered, so making it a bit shorter or a bit wider isnt a big deal :) 

The standard panel width is 30 inches, this is the width of a standard (US) door, the GHTG tension bars will fit an opening of 26 to 39 inches. If you have a space that is much wider or narrower than 30 inches, we can make you a custom panel, and if you need something special in mounting it, please just let us know we have options there too.

What about that hole?

Yes we can customize that too, we can make it smaller top to bottom, or wider if you prefer, the standard size is cut to 3.5 inches by 10 inches, then we edge trim it.

Privacy Curtain: Add a privacy curtain or a privacy panel.

Minor* size changes are free of charge. 

Color Options:

Panel Colors: We can get canvas duck in about 20 different colors, colored duck comes in slightly higher weights than we normally use, it will add a little bit of weight to the end product.

Contact Us if you want a specific color, with the exception of black, we have had enough requests for the black canvas that we have created The Midnight GHTG.

Trim Colors? Yes, we charge a flat fee of $10.00 for color trim, and we now keep three different colors in stock.

Will you make me something totally custom?

Sure, here is an example: The panel shown here was custom sized to a specific space, and had to be mounted on a slight angle. Plus the hole was lowered & offset from center to make the experience more comfortable for everyone involved (considering the other objects in the space).

The mount for this was different also since it was wide and there were other objects in the space to consider, we ended up using spring tension bars combined with a couple of small dowels. It can be set up and taken down quickly with no trace left that a glory hole was here a few min ago. It was all done with just a few photos of the space and some measurements provided by the purchaser.

So, If you prefer it suspended by cable and a custom size with multiple holes, we can do that. If you want to be able to span the width of your garage, we can do that (usually).

If you require a freestanding outdoor unit, that can accommodate total privacy for one or both parties and be totally mobile, got you covered! This would work in a garage also. (photos soon).

Here is another custom panel, this one is over 6 ft. wide and just a hair under 7 ft. tall (you are looking at it from the visitor side). 

Notice what looks like a cord in the lower right corner, that is a tie down point, as you can see in the second photo the shape of the space prevents a lower bar being used so there is an adjustable tie down on each corner, in these photos its not fully set up. The width of the panel is slightly oversized for the entryway to allow it to spread wide at the bottom.

Here it is from the owners side. As you can see we can adapt your GHTG to fit most any space :)

Have a great idea for your hole?

Please contact us with your idea and we will do our best to make it happen!

*The desision of what is a "minor" change, vs what we bill for is ours.

I hand make each and every one of these. Im a one man operation hand crafting each and every GHTG, I make them with care and attention to detail. I am producing a quality product that will last you for years.

If you ever damage it, or if you rip a seam somehow, ship it back to me & I will repair it free of charge.

 A little about me, when I turned 18 I spent way too much time at glory holes... and sadly over the years, more and more public glory holes have disappeared.

I may be a good deal older now, but I still love them.... the problem is finding them, the majority of the time they are in adult stores between the video booths. And depending on where you live those can be few and very far between. As much as I love finding them in that setting they can be risky for lots of reasons, if you love glory hole fun you already know that.

A certain amount of risk can add to the fun, we all know that, but as often as not I want to just relax, and really take my time enjoying the cock that has just popped through the hole and not have to feed $$ into a machine, or have someone bail because of a noise or a clerk that is in the mood to be a dick.

Aside from the adult stores that leaves public holes and private ones but finding a public glory hole these days is like spotting a unicorn, you hear stories...but!!!!

I started looking for a way to create my own, but thats a whole other set of issues. I like many, rent my place... the way its laid out works well for a glory hole (the front door opens into a hallway) but I cant very well build a wall with a glory hole in my apartment, and even if I could what am I supposed to do when friends stop by? Awkward!

So, that left me thinking about it, probably way too much..lol  

I decided I could figure this out!

I had requirements:

• I wanted something I could put up & down in just a few minutes.
• It needed to be well made and burly enough for hundreds of uses.
• It could not be too heavy or too bulky.
• It also had to be adjustable to fit different widths.
• It had to be very discreet when packed up.
• The hole height needed to work for the short and tall.
• It had to be easy to clean, durable, and very portable.

Thats quite a list of "wants" so I started thinking, I also guessed I was not the only person wanting something like this. That led to many failed attempts at finding the perfect materials and a design that would make a really high quality, easy to use product that will last for years! 

I think I pulled it off.... I hope you agree!