Fun Factory Vibrator Care Guide: CLICK N CHARGE, Silicone Cleaning, and Storage
By Jake Turner · Senior Editor · April 2025
Fun Factory is a German manufacturer known for body-safe silicone construction and their proprietary CLICK N CHARGE inductive charging system. Care requirements are straightforward for the silicone body, but the CLICK N CHARGE system has specific notes. Here’s what Fun Factory’s documentation specifies.
In This Article
Materials
Fun Factory vibrators use body-safe, phthalate-free medical-grade silicone for all body-contact surfaces, with ABS plastic for structural components. Most current Fun Factory toys are waterproof — IPX7 in recent models, allowing submersion up to 1 meter. The silicone is non-porous, odor-resistant, and compatible with standard sex toy cleaning.
CLICK N CHARGE System
Fun Factory’s CLICK N CHARGE is an inductive (wireless contact) charging system — the charger clicks magnetically onto the toy’s base contact points. Fun Factory’s documentation specifies: ensure the contacts are clean and dry before connecting the charger; the toy will click audibly when the charger is properly aligned; do not force the charger if it doesn’t click into position. A fully depleted battery takes approximately 2 hours to charge fully. The LED shows charging status.
CLICK N CHARGE cables are proprietary — they are not interchangeable with standard USB cables. Store the CLICK N CHARGE cable with the toy. Fun Factory sells replacement cables if the original is lost.
Cleaning Protocol
For waterproof Fun Factory toys, cleaning under warm running water with sex toy cleaner is appropriate. The silicone is non-porous and easy to clean thoroughly. Apply toy cleaner, work it across the entire surface including textured areas, rinse under warm water, and allow to air dry. For toys used anally, Fun Factory’s care documentation recommends a dedicated toy cleaner with antimicrobial properties in addition to water cleaning.
The CLICK N CHARGE contacts should be wiped dry after water cleaning to prevent contact corrosion. Avoid cleaning sprays that could pool in the contact area.
Lubricant Compatibility
Water-based lubricants only with Fun Factory’s silicone toys. Fun Factory’s documentation explicitly advises against silicone-based lubricants, which chemically interact with silicone surfaces. Oil-based lubricants are also inadvisable — they are difficult to fully clean from silicone and can leave residue that traps bacteria.
Storage
Fun Factory’s documentation recommends storing toys in a breathable fabric bag or box that allows air circulation. Keep the CLICK N CHARGE cable stored with the toy. Avoid contact between silicone surfaces — if storing multiple Fun Factory toys together, separate them with fabric or dividers. The Home in Bold box with removable dividers is well-suited for organizing multiple Fun Factory toys with their charging cables.
| Spec | Fun Factory Typical |
|---|---|
| Material | Medical-grade silicone + ABS |
| Waterproofing | IPX7 (most current models) |
| Charging | CLICK N CHARGE (proprietary inductive) |
| Charge time | ~2 hours |
| Cable | Proprietary (not USB-standard) |
| Safe lubricants | Water-based only |
Organize Your Fun Factory Collection
Fun Factory’s CLICK N CHARGE cables are proprietary and easy to misplace. The Home in Bold box keeps each toy stored with its cable in a separated compartment.
Related Articles
Store Fun Factory Toys and Their Cables Together
Removable dividers keep toys and CLICK N CHARGE cables organized.
Frequently Asked Questions
Jake Turner
Senior Editor · GloryHoleToGo
Jake has spent over a decade reviewing sexual wellness products and storage solutions. His brand care guides draw on official manufacturer documentation, direct product testing, and consultation with sex educators. Where manufacturer specifications were unavailable or varied by model, this is noted explicitly in the article.